1.1.DWS dust removal workstation, Polishing And Dust Removal- Telescopic door type, with a wind volume range of 4000-100000CMH.

1.2. Solve the problem of irregular large workpieces and dust flying during multi-point polishing. Build a polishing room, create local micro negative pressure, and remove dust by blowing and suction.

1.3.The dust removal equipment is installed indoors and discharged indoors. HEPA filters are used for secondary filtration as needed, with a purification efficiency of over 99.995%.

1.4.When solving the problem of robot polishing equipment requiring movement and rotation, there should be no obstacles around and it is difficult to arrange suction points.

1.5.Solve the problem of grinding and polishing workpieces that cannot be fixed at a certain point when the volume size is relatively large, but also need to eliminate smoke.

1.6. How to collect scattered and disorderly polishing dust and exhaust it through suction hood and exhaust duct is the key to solving polishing and welding pollution.

1.7. If the overall dust removal in the workshop is too large, the energy consumption is too high, and the investment is too high. Therefore, for the point of pollutant generation, only local spatial micro negative pressure dust removal treatment can be carried out.

1.8. Local space micro negative pressure refers to building a relatively sealed space in the form of a small house, so as to control smoke and dust pollution in this limited area without spreading.

1.9. Design Services: Free of charge to design product drawings according to the appropriate size of your on-site space，and provide installation guidance and training services