Plasma cutting machine dust collector
1. Plasma cutting machine dust collector, air volume 10000-100000CMH.
2. Plasma cutting machines are used to cut thick plates, and the concentration of smoke and dust generated during cutting is relatively high.
3. When renovating, it is necessary to install an exhaust duct type slide rail for the travel of the cutting machine, and new cutting machines usually have exhaust ducts already installed at the factory.
4.When cutting, the exhaust port corresponding to the bottom slide rail opens to remove the smoke and dust generated by the cutting.
1.1 Plasma Cutting Dust Collector, air volume range: 1000 to 100000 CMH.
1.2 Plasma cutting of thick metal plates generates a high concentration of cutting fumes and fine particles that require effective extraction and filtration.
1.3 A sliding extraction duct system can be installed along the cutting table to follow the movement of the cutting head and collect fumes near the generation point.
1.4 During cutting operations, the extraction opening corresponding to the cutting position opens to remove the generated fumes and dust.
1.5 Auxiliary airflow can be used together with the extraction system to improve fume capture efficiency and maintain effective dust collection performance.
Plasma cutting cartridge dust collector
Laser cutting dust collector
Plasma cutting wet dust collector
Plasma cutting wet dust collector
Plasma cutting wet dust collector
Plasma cutting wet dust collector
No. 173, Wuwei Industrial Zone, Xushe Town, Yixing, Jiangsu, China© 1994-2026 7US.com. All rights reserved | Privacy PolicySite map
Phone
