As a new type of filter and dust collector, cartridge dust collector is favored by customers. So what is the difference between Features of cartridge dust collector and other dust collectors? The main reason is that the cartridge dust collector has high purification efficiency, small size, and filter area. Large, good filtering effect, low pressure loss, long service life of the filter cartridge, quick and convenient installation and maintenance, and continuous use.
Technical characteristics of cartridge dust collector:
1. The filter cartridge uses imported polyester fiber as the filter material, and adheres a layer of sub-micron ultra-thin fibers to the general filter material, and the arrangement of the fibers on the adhesion layer is very close, with very small sieve holes It can block most of the sub-micron dust particles on the surface of the filter material.
2. The filter material is folded and used, which can increase the filter area and make the dust collector compact;
3. The height of the filter cartridge is small, and the workload of installation and maintenance is small;
4. Compared with the dust collector of the same volume, the filtering area is relatively large, the filtering wind speed is small, and the resistance is not large;
If you want information about removing the duster, it's all in the Erhuan. After decades of technological precipitation and continuous innovation, Jiangsu Erhuan Environmental Technology Co., Ltd. now has an elite team of R&D, design and production. The company has introduced excellent dust collector production technology from Europe and the United States, and currently has many products such as Cartridge dust collector, Wet dust collector and Baghouse dust collector.
1、 Especially designed for high concentration and fine dust collector. 2、Can be installed inside, the size can be customize. 3、 Exhaust gas emission less than 1mg/m3 with HEPA filter. 4、The usage of filter material is 25% higher than the horizontal installation. .If the dust contains VOCS smell, it can be added the third stage carbon active filter. 5、Humanized design：with Wifi model: remote control display, LAN or Internet control, phone APP control, you can track monitor the dust collector at any time.
1、 All-in-one design, easy for installation and operation, save 30% shipping cost. 2、Adaptable for dry dirty dust, and the dirty gas temperature should less than 120℃. 3、Lower price in filter replacement. 4、The usage of filter material is 25% higher than the horizontal installation. 5、If the dust contains VOCS smell, it can be added the third stage carbon active filter. 6、Humanized design：with Wifi model: remote control display, LAN or Internet control, phone APP control, you can track monitor the dust collector at any time. 7、Blue/Black/Grey/Green and more colors can be chosen.
1、Occupy 50% area of baghouse dust collector, save factory space. 2、The air volume can be adjusted flexibility with modular design, only need to add or deduct unit model. 3、Abrasion-resistant inlets, exhaust dampers can be added for special dirty dust . 4、Stainless steel material can be chosen, explosion Relief Vents Can be installed. 5、Humanized design：with Wifi model: remote control display, LAN or Internet control, phone APP control, you can track monitor the dust collector at any time. 6、Dust collector body warranty : 10 years