Industrial Wet Dust Collection Systems Please click the image below to view the detailed introduction.
Wet Dust Collection for Automotive Aluminum Wheel Polishing 1. Automotive aluminum alloy wheels may require grinding polishing or buffing to obtain the specified surface finish. 2. These processes can generate fine combustible metal dust. The dust properties and applicable safety requirements must be evaluated before equipment selection. 3. A properly engineered wet dust collection system can reduce airborne metal dust and keep the collected material in a water phase. 4. The collection method and required fire explosion and hydrogen control measures must be determined according to the actual process and local regulations.
EHWD-DVFH Multi-stage Venturi Wet Dust Collection System 1. The EHWD-DVFH combines Venturi wet scrubbing, wet dust collection and multi-stage filtration technology to provide high efficiency dust purification. 2. The system integrates Venturi injector, wet dust collector, pre filters, medium efficiency filters and HEPA filtration for different dust purification requirements. 3. The Venturi injector improves gas-liquid contact efficiency, allowing dust particles to be captured through high-speed water mist washing. 4. The sludge treatment system uses a filter press to separate solid particles from water, allowing clarified water to be recycled into the wet dust collection system. 5. The EHWD-DVFH is suitable for difficult dust applications including high temperature, oily, sticky, combustible and explosive dust conditions.
EHWD-DFH Large Airflow Wet Dust Collector with Multi-stage Filtration 1. The EHWD-DFH is a large-airflow integrated wet dust collection system combining the EHWD-D wet collection stage with G3/G4 pre-filtration, F9 medium-efficiency filtration and HEPA final filtration. 2. The wet collection stage captures the main dust load through intensive gas-liquid contact, while the downstream filtration stages progressively remove remaining airborne particles for cleaner exhaust air. 3. The G3/G4 pre-filter protects the downstream filtration stages, followed by the F9 medium-efficiency filter and HEPA final filter for enhanced particulate filtration. 4. The filtration sections are vertically integrated above the wet dust collector, reducing the required floor space compared with separately installed filtration equipment. 5. The EHWD-DFH is designed for large-airflow industrial applications requiring wet dust collection and high-efficiency final filtration, including applications where purified air may be returned indoors subject to local air quality and safety requirements.
EHWD-CFH Large Airflow Wet Dust Collector with Scraper Sludge Removal and Multi-stage Filtration 1. The EHWD-CFH is a large-airflow integrated wet dust collection system combining the EHWD-C wet collection stage with automatic chain scraper sludge removal, G3/G4 pre-filtration, F9 medium-efficiency filtration and HEPA final filtration. 2. The wet collection section captures the main dust load through intensive gas-liquid contact, while the chain scraper continuously removes settled sludge from the bottom of the machine. 3. The downstream G3/G4 pre-filter, F9 medium-efficiency filter and HEPA filter provide progressive filtration of remaining airborne particles for cleaner exhaust air. 4. The filtration sections are vertically integrated above the wet dust collector, reducing floor space compared with separately installed filtration equipment while maintaining large airflow capacity. 5. The EHWD-CFH is suitable for medium and high dust concentration applications such as foundry sand handling, sandblasting, shot blasting, crushing and other industrial processes requiring automatic sludge discharge and high-efficiency final filtration.
What are the most common wet dust collector problems? Low airflow, incorrect water level, sludge accumulation, corrosion, blocked air passages, and poor maintenance can reduce wet dust collector performance. This guide explains common problems, troubleshooting steps, and maintenance tips for industrial wet dust collection systems.
No. 173, Wuwei Industrial Zone, Xushe Town, Yixing, Jiangsu, China© 1994-2026 7US.com. All rights reserved | Privacy PolicySite map
Phone
