OEM Dust Collector Sourcing Checklist: Main Unit vs. Complete Machine
The scope you buy decides price, compliance and workload more than the model does. This checklist compares complete machines with bare main units, and lists the ten points a serious OEM quotation depends on.
The short answer
When you source a dust collector from an overseas OEM, the most important decision is not the model — it is the supply scope. A complete machine arrives ready to connect: housing, filter media, fan, motor and controls from one factory. A main unit (bare housing) is the mechanical core only — housing plus filtration — and you source the fan electrics, motor and control cabinet locally. The main-unit route exists for one reason: electrical compliance is local. Motors, starters and cabinets must meet your market's rules (CE, UL, SEC and others), and the fastest way to satisfy them is to buy those parts at home. Choose the scope first, then compare prices — quotes for different scopes are not comparable. Our OEM/ODM page summarises the service; this guide is the working checklist.
The two scopes, side by side
| Item | Complete machine | Main unit (bare housing) |
|---|---|---|
| Housing & structure | 7US | 7US |
| Filter media (cartridges / bags) | 7US | 7US |
| Pulse valves & cleaning system | 7US | 7US |
| Fan & motor | 7US (Chinese standard configuration; certified motors procurable on request) | Buyer sources locally, or 7US supplies the fan fitted with a certified motor by agreement — the fan as an assembly carries no ATEX certification |
| Control cabinet, VFD, wiring | 7US (UL-certified cabinets, pulse valves and controllers procurable on request) | Buyer sources locally to local code |
| Electrical certification | Component certificates as procured; the complete machine itself carries no UL or ATEX certification | Buyer's local parts carry local certification |
| Assembly & installation | Buyer installs; remote guidance available, on-site guidance by agreement | Buyer assembles and installs with supplied drawings and assembly instructions; remote guidance available, on-site guidance by agreement |
| Best fit | Markets that accept Chinese-standard configuration | EU / North America and other markets with strict electrical rules; integrators with their own electrical capability |
Certified components, uncertified machine — a real example. In 2022 we supplied a dust collector for a laser cutting line exported to the United States. At the customer's request, the motor, the electrical components and the pulse controller were all selected from UL-certified manufacturers. The machine itself carried no UL certification, and it was quoted and sold on exactly that basis. This is the normal pattern in OEM supply: component certificates where your project needs them, whole-machine compliance completed where the machine is installed.
The sourcing checklist
Work through these ten points before you ask for a price — a serious OEM quote depends on all of them.
1. Duty data first: filtration area (m²), negative-pressure rating of the housing, and filter media type. Airflow alone is not a specification — it follows from area × filtration velocity.
2. Scope line: state in writing which scope you are buying (complete machine or main unit) and where the fan, motor and cabinet come from.
3. Local electrical rules: voltage, frequency, motor standard and any certification your market requires for electrical parts. Confirm which side supplies each part against those rules.
4. Compliance documents: for the EU, a main unit ships as partly completed machinery with a Declaration of Incorporation and assembly instructions; whole-machine compliance is completed by the integrator. Ask what documentation the factory provides — and what it does not.
5. Explosion protection, if relevant: state your dust data and the protection standard your project follows. Protection devices (venting panels, suppression, isolation) are specified per project; do not assume a whole-unit ATEX or Ex certificate exists — ask. Keep the two levels separate: certified components are often procurable on request (ATEX motors; UL-certified cabinets, pulse valves and pulse controllers), with availability confirmed item by item — some devices can be sourced in China and some cannot. What cannot be offered is a whole-machine ATEX or UL certificate, and a fan fitted with an ATEX motor is still not an ATEX-certified fan.
6. Drawings before order: layout and interface drawings (duct connections, fan position, maintenance clearances) confirmed before production, not after.
7. Packaging & shipping: how the unit is split for container loading, what is crated and what is palletised, and who pays for which packaging — agreed before the contract price is fixed. Our standard term is FOB Shanghai; for established customers and larger orders, CIF can be arranged case by case, depending on the destination and the shipment.
8. Installation responsibility: overseas installation is by the buyer or a local partner, under both scopes. Two kinds of support exist. Remote guidance — online, by phone or by video — is available during assembly and commissioning. On-site guidance is the exception: it happens only when the buyer agrees to pay the on-site service fee, we judge the visit genuinely necessary, and both sides have agreed the terms. Guidance is technical direction only; our engineer does not perform installation work.
9. Spares & consumables: first-fill filter media is included in the scope; agree the spare-parts list (cartridges, bags, pulse valves, solenoids) and reorder route at order time.
10. Acceptance criteria: what will be checked on arrival and at commissioning — housing pressure rating, filtration area as built, media type as ordered — and how discrepancies are handled.
Frequently asked questions
Why is the main-unit scope cheaper on paper?
Because part of the machine — motor, cabinet, wiring — is bought in your market instead of shipped. Compare total landed and commissioned cost, not the factory quote alone.
Can 7US supply the fan but not the motor or cabinet?
Yes, scope is divisible: housing, filtration, fan body, and electrics can be split item by item, as long as the split is written into the quotation.
Who certifies the finished system in the EU or North America?
The party who completes it. A main unit is supplied as partly completed machinery with a Declaration of Incorporation; the integrator who adds electrics and controls completes whole-machine compliance locally.
Do you install overseas?
No. Installation and commissioning are the buyer's responsibility under both scopes. We guide remotely — online, by phone or video — and supply drawings and assembly instructions. An engineer visit is possible only by agreement, when the buyer pays the on-site service fee and the visit is genuinely necessary; the visit is technical guidance, not installation labour.
Send us your process data
Dust type, airflow and site conditions — we will size the unit and reply with a scoped quotation.